我的liteon -0841死了！！救救我！！
在我升級韌體時死掉了！！
請各位好心人士救救我！！
明天想去換一台新的（我今天才買）
請各位好心人士能詳細告之升級方法....
我燒錄機是放在sedondary master drive
下面是我看到的升級方法...可是我英文不好...嗚嗚嗚....
請救救我！！
Convert Liteon LTR-0841 (8x) to 12101B (12x)!
Here is another quite interesting trick! How to convert your Lite-on LTR-0841
(8x) to LTR-1210B (12x). Note that we haven't tested it so we cannot be sure i
f it works. USE IT AT YOUR OWN RISK!
"...Yesterday I came across a bulletin board in Taiwan, in which a guy said th
at the two BURN-Proof-enabled CD-RW drives made by the Taiwanese company LITE-
ON, LTR-0841 and LTR-12101B, are actually the same drive with differences only
in the firmware. His arguments are:
1. The two drives look identical in appearance
2. For what other reason should LITE-ON add the BURN-Proof feature for LTR-084
1, a low-cost 8x CD-RW, unless it is a repackaged LTR-12101B?
3. Both drives are still being produced in vast volumes. Using the same design
for the two drives can save lots of money.
He also told us how to convert the LTR-0841 to LTR-12101B. In his message he h
as given us a file LS17.ziphttp://www.johny.sk/cdrinfo/files/LS17.zip, which c
ontains a BIN file LS17.BIN and a flashing utility PFLASH.EXE. The steps are r
eally simple:
1. Reboot your PC into a clean DOS prompt.
2. Run PFLASH LS17.BIN /PM /NP /ALL (PM means primary master. If you LTR-0841
is located at another port, use parameters /PS, /SM and /SS for primary slave,
secondary master and secondary slave respectively).
3. Shut down your PC.
4. Power up again and you'd get a LTR-12101B!
5. If anything goes wrong, just flash back the firmware for the LTR-0841 that
he provided in the two zip files MS10.ziphttp://www.johny.sk/cdrinfo/files/ms1
0.zip
and MS8E.ziphttp://www.johny.sk/cdrinfo/files/ms8e.zip.
The trick works because the flashing utility works for any LITE-ON CD-RW drive
s without checking the model number. I do not personally own a LTR-0841 so I c
an't verify his words. Good luck to those who own a LTR-0841 and like to try a
little overclocking! Please don't blame me if things go wrong :).."
LiteOn IT CDRW drive flash utility Version pre-0.5 Date 04/10/2000
Usage : flashup FileName [ /pm | /ps | /sm | /ss ] [/np] [/nv] [/all]
FileName : File in BIN form. The file size must be 256K.
/pm -> Primary Port Master drive. /ps -> Primary Port Slave drive
.
/sm -> Secondary Port Master drive. /ss -> Secondary Port Slave drive
.
/np -> Do NOT prompt the user before flash the BIN file.
/nv -> Do NOT verify after flash the BIN file.
/all -> Also update the Boot Code. For advanced user only.