sos－－請各位大大救命

看板：組裝電腦發表時間：2002-03-27 08:10:16 回覆數：2 則瀏覽點閱：63 次

樓主黃毛丫頭

發文時間：2002-03-27 08:10:16

2月份去幫朋友選購電腦配備（同一家購買）並請他幫忙組裝後自行買windows xp home版回來安裝
每次開機先出現如下之畫面：
A Pribkem has been detected windows has been shut down to prevent.
damage to your computer,
PAGE_FAULT_IN_MPM[AGED_AREA(3/26以前出現--有請教過芋位大,他教我移除顥示卡驅動程式再下載新的試試,但找不到光碟片,只好去原來店家工程師說驅動程式是內建的所以要檢修花1260)

BAD_SYSTEM_CNFIG_INFO(3/27出現--3/25有請店家修理過)

If this is the first time you`ve seen this stop error screen ,restart your computer. If this screen.appears again,follow these steps:
Check to make sure any new hardware or software is properly installed
If this is a new installastion,ask your hardware is properly installed.
If this a newinstallation,ask you hardwarw or software mannfacturer for any windows upates you might need .
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching orshadowing
If you need to use safe mode to remove or disable components,restart your computer press F8 to select Advanded startup options and then select safe mode.
....... (這一行是亂碼)

***stop:0x00000050(0xfffffffe,0x00000000,0x805ACEDC,0x00000000)3/26
***stop:0x00000074(0x000000003,0x00000002,0x80087000,0xc000014c)3/27
請問出現什麼問題該如何解決(請問以上英文是什麼意思--我是英文白吃)
感謝各位大大們
(用打若有錯字請見諒)

慶幸自己還活著，一個遊戲人間的過客

💬 討論串回覆 (2 則)

#1 樓 choug1026

📅 2002-03-27 12:22:35

If this is the first time you`ve seen this stop error screen ,restart your computer.If this screen.appears again,follow these steps:

如果開機螢幕上出現錯誤，請重新開機。假如螢幕上出現再一次出問題，請對照以下面排除問題：

Check to make sure any new hardware or software is properly installed
請檢察硬體和軟體是否安裝適當

－－－－以下我不太瞭解－－－－－－
If this is a new installastion,ask your hardware is properly installed.

If this a newinstallation,ask you hardwarw or software mannfacturer for any windows upates you might need .

If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching orshadowing

－－－－－－－－－－－－－－－－－

If you need to use safe mode to remove or disable components,restart your computer press F8 to select Advanded startup options and then select safe mode.

（If you need to use safe mode to remove or disable components）我不知道如何解譯！！
restart your computer press F8 to select Advanded startup options and then select safe mode.

重新啟動你旳電腦，然後按F8選擇Advanded startup options and then select safe mode.

stop:0x00000050(0xfffffffe,0x00000000,0x805ACEDC,0x00000000)3/26

0x00000050 檔案已經存在。

-------------------------------
stop:0x00000074(0x000000003,0x00000002,0x80087000,0xc000014c)3/27
我就不清楚了

以上有釋譯錯請多多指教

#2 樓 Kuloo

📅 2002-03-27 14:21:43

補充一下choug1026兄沒有翻譯的部分,可能不是翻的很好,請見諒及請了解正確翻譯的大大指導一下.

基本上您的問題依照這些訊息所述做法,問題的答案應該可以慢慢的找出來,試試看;還有,有試著換RAM來測測看嗎?請準備一條確定"OK"的RAM試試看.

預祝一切順利.

－－－－－－－－－－－－－－－－－
If this is a new installastion,ask your hardware is properly installed.
如果這是新的電腦設備,請問您的硬體是否安裝正確.

If this a new installation,ask you hardwarw or software mannfacturer for any windows upates you might need .
如果這是新的電腦設備,請問您的硬體或軟體mannfacturer是否可能需要升級至視窗所需.(mannfacturer 查不到啥字)

If problems continue,disable or remove any newly installed hardware or software.
如果這個問題持續出現,請關閉或移除任何新安裝的硬體或軟體.

Disable BIOS memory options such as caching or shadowing.
請關閉BIOS內記憶體選項,像是caching(快取類)或shadowing(映射類).

－－－－－－－－－－－－－－－－－
If you need to use safe mode to remove or disable components.
如果您想要使用安全模式來移除或關閉一些電腦元件.

呵呵呵呵呵呵

Edited by - kuloo on 03/27/2002 14:24:06

⬅️ 返回【組裝電腦】看板列表 🏛️ 回到經典論壇博物館首頁

sos－－請各位大大 救命

sos－－請各位大大救命